Dell S6100 Configuration Manual Download Page 96

Page: 96 / 1743

Defaults

Disabled

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Replacement command for the S4820T. Replaces the

enable xfp-power-updates

command.

8.3.11.4

Replacement command for the Z9000. Replaces the

enable xfp-power-updates

command

8.3.10.0

Replacement command for the S4810 only. Replaces the

enable xfp-power-

updates

command.

Usage Information

To enable polling and to configure the polling frequency, use this command.

end

Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER OSPF modes).

Syntax

end

Command Modes

•

CONFIGURATION

•

SPANNING TREE

•

MULTIPLE SPANNING TREE

•

LINE

•

INTERFACE

•

TRACE-LIST

•

VRRP

•

ACCESS-LIST

•

PREFIX-LIST

•

AS-PATH ACL

•

COMMUNITY-LIST

•

ROUTER OSPF

•

ROUTER RIP

•

ROUTER ISIS

•

ROUTER BGP

Control and Monitoring

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S6100

Reviews:

Dell S6100, Configuration Manual, Page: 96 / 1743

Search results

Summary of Contents for S6100

Reviews: