detail
(OPTIONAL) Enter the keyword
detail
to display detailed interface dampening data.
Defaults
None
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S6100–ON.
9.9(0.0)
Added support to display the interface configurations corresponding to a range of ports.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.5.1.0
Added support for 4-port 40G line cards on the E-Series.
8.1.1.0
Introduced on the E-Series.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
Introduced
Example
Dell# show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 1/1/2/1 Up 0 0 20 800 4500 120
Te 1/1/10/1 Up 0 0 5 750 2500 20
Dell#
Related Commands
•
— configure dampening on an interface.
•
— display any interface with a non-default configuration.
show interfaces stack-unit
Display information on all interfaces on a specific S-Series or Z-Series stack member.
Syntax
show interfaces stack-unit
unit-number
708
Interfaces
