Dell S6100, Configuration Manual

Page: 407 / 1743

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Related Commands
• deny bandwidth – link band width extended-community attribute as the matching criteria to deny incoming or
outgoing traffic.
redistribute
Redistribute routes into BGP.
Syntax redistribute {connected | static} [route-map map-name ]
To disable redistribution, use the
no redistribution {connected | static}
command.
Parameters
connected Enter the keyword
connected
to redistribute routes from physically connected
interfaces.
static
Enter the keyword
static
to redistribute manually configured routes.
These routes are treated as incomplete routes.
route-map map-
name
(OPTIONAL) Enter the keyword
route-map
then the name of an established route map.
Only the following ROUTE-MAP mode commands are supported:
• match ip address
• set community
• set local-preference
• set metric
• set next-hop
• set origin
• set weight
If the route map is not configured, the default is deny (to drop all routes).
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Border Gateway Protocol 407