Dell S6100, Configuration Manual, Page: 1047 / 1743

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
delay
Configure the time delay used before communicating a change in the status of a tracked object to clients.
Syntax delay {[up seconds ] [down seconds ]}
To return to the default setting, use the
no delay
command.
Parameters
seconds Enter the number of seconds the object tracker waits before sending a notification about
the change in the UP and/or DOWN state of a tracked object to clients. The range is 0 to
180. The default is
0 seconds .
Defaults 0 seconds
Command Modes OBJECT TRACKING ( conf_track_object-id )
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information
You can configure an UP and/or DOWN timer for each tracked object to set the time delay before a change in the
state of a tracked object is communicated to clients. The configured time delay starts when the state changes
from UP to DOWN or vice-versa.
Object Tracking 1047