Dell S6100, Configuration Manual

Page: 1119 / 1743

Related Commands
• show ip ospf database — display OSPF database information.
show ip ospf database external
Display information on the AS external (type 5) LSAs.
Syntax show ip ospf [ process-id | vrf vrf-name ] database external [ link-state-id ]
[adv-router ip-address ]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered,
command applies only to the first OSPF process.
vrf vrf-name Enter the keyword
vrf
followed by the name of the VRF to view information on AS
external LSAs corresponding to the OSPF processes that are tied to a specific VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the
LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords
adv-router
and the ip-address to display only the
LSA information about that router.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Open Shortest Path First (OSPFv2 and OSPFv3) 1119