•
ipv6 nd raguard policy policy-name
— define the RA guard policy name and enter the RA guard policy
configuration mode.
mtu
Enable the verification of the configured maximum transmission unit (MTU) value in the received RA packets.
Syntax
mtu
value
To reset the MTU value, use the
no mtu
value
command.
Parameters
value
Enter the maximum transmission unit value in bytes. The range is from 1,280 to 11,982
bytes.
Defaults
0
Command Modes
POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the C9010.
9.10(0.0)
Introduced on the S6100-ON.
9.9(0.0)
Introduced on the Z9500.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
•
— configure the RA guard related commands.
•
ipv6 nd raguard policy policy-name
— define the RA guard policy name and enter the RA guard policy
configuration mode.
other–config–flag
Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification process is
bypassed.
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the
no other-config-flag {on | off}
command.
Parameters
on
Enter the keyword
on
to set the other-config-flag value as ON.
off
Enter the keyword
off
to set the other-config flag value as OFF.
Neighbor Discovery Protocol (NDP)
1037
