Dell S6100 Configuration Manual Download Page 958

Page: 958 / 1743

clear lldp counters

Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.

Syntax

clear lldp counters [interface

interface

]

Parameters

interface

interface

(OPTIONAL) Enter the following keywords and the interface information:

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then

the stack/slot/port/subport information.

•

For a 25-Gigabit Ethernet interface, enter the keyword

twentyFiveGigE

then the

stack/slot/port/subport information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword

fiftyGigE

then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword

hundredGigE

then the

stack/slot/port information.

Defaults

None

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.5.1.0

Added support for 4-port 40G line cards on the E-Series.

8.3.7.0

Introduced on the S4810.

7.7.1.0

Introduced on the S-Series.

7.6.1.0

Introduced on the C-Series.

7.4.1.0

Introduced on the E-Series.

958

Link Layer Discovery Protocol (LLDP)

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S6100

Reviews:

Related manuals for S6100

Brands by name

Popular brands

Dell S6100, Configuration Manual

Search results

Summary of Contents for S6100

Reviews:

Related manuals for S6100

Brands by name

Popular brands