manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 1609 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 1609

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.6(0.0)

Added support for VRF.

9.4.(0.0)

Added support for VRF.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.11.1

Introduced on the Z9000.

8.4.1.0

Added IPv6 support.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.1.1.0

Introduced on the E-Series.

Usage Information

You can configure multiple time-serving hosts. From these time-serving hosts, the Dell Networking OS chooses 
one NTP host with which to synchronize. To determine which server is selected, use the 

show ntp 

associations

 command.

Because many polls to NTP hosts can affect network performance, Dell Networking recommends limiting the 
number of hosts configured.

By default, the system performs a time synchronization if the time difference from the time source is greater than 
one second.

Related Commands

•

show ntp associations

 — displays the NTP servers configured and their status.

ntp source

Specify an interface’s IP address to be included in the NTP packets.

Syntax

ntp source 

interface

To delete the configuration, use the 

no ntp source

 command.

Parameters

interface

Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then 

the stack/slot/port/subport information.

System Time and Date

1609

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments