•
— enable the verification of the advertised other configuration parameter.
•
— set the advertised reachability time.
•
— set the advertised retransmission time.
•
— enable the verification of the advertised default router preference (DRP) value.
•
— apply the policy to trusted ports.
show ipv6 nd ra–guard policy
Display the configurations applied on all the RA guard policies or a specific RA guard policy.
Syntax
show ipv6 nd ra-guard policy
policy-name
Parameter
policy
policy-name
Enter the keyword
policy
then the policy name. The policy name allows a maximum of
140
characters.
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the C9010.
9.10(0.0)
Introduced on the S6100-ON.
9.9(0.0)
Introduced on the Z9500.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, Introduced on the S6000–ON, and
Z9000 switches.
Example
Related Commands
•
— configure the RA guard related commands.
•
— define the RA guard policy name and enter the RA guard policy list configuration
mode.
•
— specify the role of the device attached to the port.
•
— enable the verification of the advertised hop count limit.
•
— set the maximum transmission unit (MTU) value.
•
— enable the verification of the advertised other configuration parameter.
•
— set the advertised reachability time.
•
— set the advertised retransmission time.
•
— enable the verification of the advertised default router preference (DRP) value.
•
— apply the policy to trusted ports.
1042
Neighbor Discovery Protocol (NDP)