Dell S6100 Configuration Manual Download Page 1222

Page: 1222 / 1743

show ip pim tib

View the PIM tree information base (TIB).

Syntax

show ip pim [vrf

vrf-name

] tib [

group-address

[

source-address

]]

Parameters

vrf

vrf-name

(OPTIONAL) Enter the keyword

vrf

followed by the name of the VRF to configure this

setting on that VRF.

NOTE:

Applies to specific VRF if input is provided, else applies to Default

VRF.

group-address

(OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D).

source-address

(OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D).

Command Modes

•

EXEC

•

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Added support for VRF. Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.3.11.1

Introduced on the Z9000.

8.1.1.0

Introduced on the E-Series.

7.8.1.0

Introduced on the S-Series.

Usage Information

The following describes the

show ip pim tib

command shown in the following example.

Field

Description

(S, G)

Displays the entry in the multicast PIM database.

uptime

Displays the amount of time the entry has been in the PIM route table.

1222

PIM-Sparse Mode (PIM-SM)

«
...
1220
1221
1222
1223
1224
...
»

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S6100

Reviews:

Dell S6100, Configuration Manual, Page: 1222 / 1743

Search results

Summary of Contents for S6100

Reviews: