manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 629 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 629

Version

Description

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on C-Series, E-Series, and S-Series

Usage Information

Fixed registration prevents an interface, configured using the command line, to belong to a VLAN (static 
configuration) from being unconfigured when it receives a 

Leave

 message. Therefore, Registration mode on that 

interface is fixed.

Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The 
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is removed 
from the port that sends GVRP advertisements to this device, the port stops being a member of the VLAN.

To advertise or learn about VLANs through GVRP, use the 

forbidden

 command when you do not want the 

interface.

Related Commands

•

show gvrp

 — display the GVRP configuration including the registration.

protocol gvrp

Access GVRP protocol — (config-gvrp)#.

Syntax

protocol gvrp

Defaults

Disabled.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

GARP VLAN Registration (GVRP)

629

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments