Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.0
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
Usage Information
This command enables a hardware watchdog mechanism that automatically reboots an Dell Networking OS
switch/ router with a single unresponsive unit. This behavior is a last-resort mechanism intended to prevent a
manual power cycle.
show hardware mac
Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.
Syntax
show hardware mac {eg-acl | in-acl} stack-
unit id
port-set
0–0
pipeline
pipeline-number
Parameters
eg-acl | in-acl
Enter either the keyword
eg-acl
or the keyword
in-acl
to select between ingress or
egress ACL data.
stack-
unit id
Enter the keyword
stack-unit
to select the stack unit ID.
port-set
0–0
Enter the keywords
port-set
with a port-pipe number to display the MAC ACL entries
for the specified port-pipe number. . The range is from 0 to 0.
pipeline
pipeline-
number
Enter the keyword
pipeline
with a pipeline number to display the MAC ACL entries
specific to the pipeline number. The range is from 0 to 3.
Defaults
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
516
Debugging and Diagnostics
