Version
Description
6.4.1.0
Introduced
Usage Information
You cannot delete a Management port.
The Management port is enabled by default (
no shutdown
). To assign an IP address to the Management port,
use the
ip address
command.
Example
Dell(conf)# interface managementethernet 1/1
Dell(conf-if-ma-1/1)#
Related Commands
•
— configure a static route that points to the Management interface or a forwarding router.
•
— Set the speed for the Management interface.
interface null
Configure a Null interface on the switch.
Syntax
interface null
number
Parameters
number
Enter zero (0) as the Null interface number.
Defaults
Not configured; number =
0
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
Interfaces
679