isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval
seconds
[level-1 | level-2]
To return to the default values, use the
no isis csnp-interval [
seconds
] [level-1 | level-2]
command.
Parameters
seconds
Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is
10
.
level-1
(OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 1.
level-2
(OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 2.
Defaults
seconds =
10
;
level-1
(if not otherwise specified)
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
Usage Information
The default values of this command are typically satisfactory transmission times for a specific interface on a
designated intermediate system. To maintain database synchronization, the designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.
isis hello-interval
Specify the length of time between hello packets sent.
Syntax
isis hello-interval
seconds
[level-1 | level-2]
864
Intermediate System to Intermediate System (IS-IS)
