manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 99 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 99

Dell™ Printer Configuration Web Tool

97

13

Dell™ Printer Configuration Web Tool

 

NOTE: 

The images used in this manual are those of the Dell C1765nfw Color Multifunction Printer unless otherwise mentioned.

Overview

 

NOTE: 

This web tool is available only when the printer is connected to a network.

One of the features of the 

Dell Printer Configuration Web Tool

 is the 

E-Mail Alert Setup

, which sends an e-mail to 

you or the key operator when the printer needs supplies or intervention.

To fill out printer inventory reports requiring the asset tag number of all the printers in your area, use the 

Printer 

Information

 feature in the 

Dell Printer Configuration Web Tool

. Enter the IP address of each printer on the 

network to display the asset tag number.
The 

Dell Printer Configuration Web Tool

 feature also allows you to change the printer settings and keep track of 

printing trends.

Setting Up the Dell Printer Configuration Web Tool

Ensure that you activate JavaScript in your browser before using the 

Dell Printer Configuration Web Tool

.

It is recommended that you configure the environment settings of your web browser before using the 

Dell Printer 

Configuration Web Tool

.

 

NOTE: 

The Dell Printer Configuration Web Tool pages may be unreadable if the language differs from that of your web browser.

Setting Up From Web Browser

It is recommended that you configure both the environment settings of your web browser and the operator panel 

before using the 

Dell Printer Configuration Web Tool

.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments