manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 247 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 247

Copying

245

Changing the Default Settings

The COPY menu options, including contrast, and image quality can be set to the most frequently used modes. 

When you copy a document, the default settings are used unless they are changed by using the corresponding 

buttons on the operator panel.

 

NOTE: 

While you set copy options, pressing the AC (All Clear) button cancels the changed settings and returns to the default 

status.

To create your own default settings:

1

Press the 

 

(Menu) 

button.

2

Press the 

 button until 

System

 is highlighted, and then press the 

 

(Set)

 button.

3

Ensure that 

Defaults Settings

 is highlighted, and then press the 

 

(Set)

 button.

4

Ensure that 

Copy Defaults

 is highlighted, and then press the 

 

(Set)

 button.

5

Press the 

 button until the desired menu item is highlighted, and then press the 

 

(Set)

 button.

6

Press the   or 

 button until the desired setting is highlighted or enter the value using the numeric keypad, and 

then press the 

 

(Set)

 button.

7

Repeat steps 5 and 6, as needed.

8

To return to the previous screen, press the   

(Back) 

button.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments