manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 21 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 21

Dell™ C1765nf/C1765nfw Color Multifunction Printer User's Guide

19

1

Dell™ C1765nf/C1765nfw Color Multifunction Printer 

User's Guide

Click the links to the left for information on the features, options, and operation of your Dell C1765nf/C1765nfw 

Color Multifunction Printer. For information on other documentation included with your Dell C1765nf/C1765nfw 

Color Multifunction Printer, see "Finding Information" on page 21.

 

NOTE: 

In this manual, Dell C1765nf/C1765nfw Color Multifunction Printer is referred to as the "printer."

Conventions

The following describe the meaning of the symbols and fonts used in this manual:

Bold

 texts

: • Names of hardware button on the operator panel.

• Screen names on the LCD panel.
• Menus, commands, windows, or dialog boxes displayed on the computer screen.

Texts in 

Courier New

 font : • Menus and messages displayed on the LCD panel.

• Characters entered from the computer.
• Directory paths.

<

>

: • Key on the keyboard of the computer.

→

: • Indicates a path to a certain item within a procedure on a computer.

" "

: • Cross references in this manual.

• Characters entered from the operator panel.
• Messages displayed on the computer screen.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments