manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 246 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 246

244

Copying

Using the ID Copy

You can copy both sides of ID card on one side of a sheet of paper in its original size by selecting 

Start ID Copy

. 

To make a copy:

1

Place an ID card facing down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the Document Glass" on page 233.

2

Press the 

 (

Copy

) button.

3

To specify the copy options below, press the 

 button until 

Preferences

 is highlighted, and then press the 

 (

Set

) button.

• Lighter/Darker
• Sharpness
• Auto  Exposure
• Color
For details about copy options, see "Setting Copy Options" on page 235.

4

Press the 

 button until 

Start ID Copy

 is highlighted, and then press the 

 (

Set

) button.

After the front side of the ID card is scanned, the display prompts you to turn it over.

a

To scan the rear side of the ID card, turn it over and press the 

 button until 

Continue

 is highlighted, and 

then press the 

 (

Set

) button.

b

To finish copying without scanning the rear side of the ID card, press the 

 button until 

Print Now

 is 

highlighted, and then press the 

 (

Set

) button.

 

NOTE: 

If the Function Enabled setting for 

COPY

 is set to 

On(Color Password)

, you need to enter the four digit 

password to start copying in color. For details, see "Function Enabled" on page 197.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments