manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 222 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 222

220

Loading Print Media

4

Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack 

on a level surface.

5

Load print media on the PSI with the top edge first and with the recommended print side facing up.

6

Adjust the width guides until they rest lightly against the edges of the stack of print media.

7

Select the paper type from the printer driver if the loaded print media is not standard plain paper. If a 

user-specified print media is loaded in the PSI, you must specify the paper size setting by using the printer driver.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments