manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 201 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 201

Understanding the Printer Menus

199

USB Settings

Use the 

USB Settings

 menu to change printer settings affecting a USB port.

 

NOTE: 

Values marked by an asterisk (*) are the factory default menu settings.

USB port

Purpose:

To enable or disable the USB interface. The change takes effect after the printer is turned off and then on.

Values:

Panel Language

Purpose:

To specify the language to be used on the operator panel.

Values:

Enable*

Enables the USB interface.

Disable

Disables the USB interface.

English*
Français
Italiano
Deutsch
Español
Nederlands
Dansk
Norsk
Svenska

*1

*1

Dell C1765nf Color Multifunction 
Printer only

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments