manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 173 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 173

Understanding the Printer Menus

171

Margin Middle

Purpose:

To specify the value of the middle margin.

Values:

TIFF File Format

Purpose:

To specify the default TIFF file format.

Values:

Image Compression

Purpose:

To specify the image compression level.

Values:

Max E-Mail Size

Purpose:

To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes. The default 

is 2048 K bytes.

0 mm*/0.0 inch*

Specify the value in increments of 1 mm/0.1 inch.

Available Range:

0-50 mm/0.0-2.0 inch

TIFF V6

*

Sets the default TIFF file format to TIFF V6.

TTN2

Sets the default Tiff file format to TTN2.

High

Sets the image compression level to 

High

.

Medium*

Sets the image compression level to 

Medium

.

Low

Sets the image compression level to 

Low

.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments