manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 329 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 329

Maintaining Your Printer

327

Entering Values

The Tool Box

Using the 

Tool Box

, enter the values that you found in the color registration chart to make adjustments. 

1

Click 

Start

 → 

All Programs

 → 

Dell Printers

 → 

Dell C1765 Color Multifunction Printer 

→

 

Tool Box

.

 

NOTE: 

The Select Printer window appears in this step, when multiple printer drivers are installed on your computer. In this 

case, click Dell C1765nf Color Multifunction Printer or Dell C1765nfw Color Multifunction Printer listed in Printer Name.

The 

Tool Box

 opens.

2

Click the 

Printer Maintenance

 tab.

3

Select 

Registration Adjustment

 from the list at the left side of the page.

The registration adjustment page is displayed.

4

Clear the 

On

 check box for 

Auto Registration Adjustment

.

5

Select the value with the straight line, and then click 

Apply New Settings

.

6

Click 

Start

 next to 

Print Color Regi Chart

.

The color registration chart is printed with the new values.

7

Adjust the values for every color until the lines at 0 are the straightest. If a line is not the straightest at 0, determine 

the value and adjust the printer again.

 

CAUTION: 

After printing the color registration chart, do not turn off the printer until the printer motor has stopped running. 

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments