manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 145 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 145

Understanding the Tool Box Menus

143

TCP/IP Settings

Purpose:

To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.

Values:

Tray Settings

Purpose:

To display the paper size and type of paper loaded in the Multipurpose Feeder (MPF).

Values:

IP Address Mode

Displays the method for acquiring the IP address.

IP Address

Displays the IP address of your printer.

Subnet Mask

Displays the subnet mask.

Gateway Address

Displays the gateway address.

Paper Type

Displays the paper type setting of the MPF.

Paper Size

Displays the paper size setting of the MPF.

Custom Size - Y

Displays the length of custom size paper loaded in the MPF.

Custom Size - X

Displays the width of custom size paper loaded in the MPF.

Display Popup

Displays whether to use a popup menu that prompts the user to set 

Paper Type

 

and 

Paper Size

 when the paper is loaded in the MPF.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments