manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 354 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 354

352

Troubleshooting

Pitched color dots

If this trouble comes out, contact Dell.

Vertical blanks

Mottle

Action

Yes

No

1

Clean inside the printer and performing test print.

a

Clean inside the printer by using the cleaning rod. See "Cleaning 

Inside the Printer" on page 321.

b

Click 

Print Test Page

 in 

Printer properties

 of the printer driver.

Is the problem recovered?

The task is complete.

Contact Dell.

Action

Yes

No

1

Adjust the transfer bias.

a

Launch the 

Tool Box

, click 

Adjust Transfer Roller

 on the 

Printer 

Maintenance

 tab.

b

Adjust the setting for the type of print media being used.

Is the problem recovered?

The task is complete.

Go to action 2.

2

If you use non-recommended print media, use the print media 

recommended for the printer.
Is the problem recovered?

The task is complete.

Contact Dell.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments