manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 293 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 293

Faxing

291

5

Ensure that 

Start Fax

 is highlighted, and then press the 

 

(Start)

 button.

When you are using the document glass, the display prompts you for another page. Press the 

 button to select 

Yes

 to add more documents or to select 

No

 to begin sending the fax immediately, and then press the 

 

(Set)

 

button.

Group Dial

If you frequently send the same document to several destinations, you can create a group of these destinations and 

set them under a one-digit group dial location. This allows you to use a group dial number setting to send the same 

document to all the destinations in the group.

 

NOTE: 

You need to register fax destinations in the speed dial beforehand.

 

NOTE: 

You cannot include one group dial number within another group dial number.

Setting Group Dial

1

Press the 

 

(Menu)

 button.

2

Press the 

 button until 

System

 is highlighted, and then press the 

 

(Set)

 button.

3

Press the 

 button until 

Admin Menu

 is highlighted, and then press the 

 

(Set)

 button.

4

Press the 

 button until 

Phone Book

 is highlighted, and then press the 

 

(Set)

 button.

5

Press the 

 button until 

Group Dial

 is highlighted, and then press the 

 

(Set)

 button.

6

Press the 

 button until the desired group dial number between 1 and 6 is highlighted, and then press the 

 

(Set)

 button.

7

Ensure that 

Name

 is highlighted, and then press the 

 

(Set)

 button.

8

Enter the name, and then press the 

 

(Set)

 button.

9

Ensure that 

Speed Dial No

 is highlighted, and then press the 

 

(Set)

 button.

10

Press the 

 button to move the cursor to the speed dial number you want to register in the group dial, press the 

 (

Set

) button to select the number, and then press the   button.

11

Ensure that 

Apply Settings

 is highlighted, and then press the 

 

(Set)

 button.

12

When 

Are You Sure?

 is displayed, ensure that 

Yes

 is highlighted, and then press the 

 

(Set)

 button.

13

To store more group dial numbers, repeat steps 6 to 12. 

14

To return to the previous screen, press the   

(Back) 

button.

Editing Group Dial

You can delete a specific speed dial number from a selected group or add a new number to the selected group.

1

Press the 

 

(Menu)

 button.

2

Press the 

 button until 

System

 is highlighted, and then press the 

 

(Set)

 button.

3

Press the 

 button until 

Admin Menu

 is highlighted, and then press the 

 

(Set)

 button.

4

Press the 

 button until 

Phone Book

 is highlighted, and then press the 

 

(Set)

 button.

5

Press the 

 button until 

Group Dial

 is highlighted, and then press the 

 

(Set)

 button.

6

Press the 

 button until the group dial number that you want to edit is highlighted, and then press the 

 

(Set)

 

button.
To change the group dial name:

a

Ensure that 

Name

 is highlighted, and then press the 

 

(Set)

 button.

b

Enter a new name, and then press the 

 

(Set)

 button.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments