Dell C1765nf Color Laser User Manual Download Page 203

Page: 203 / 382

Understanding the Printer Menus

201

Resetting Defaults

After executing this function and rebooting the printer, the menu parameters or data are reset to their default values.

NOTE:

A password is required to enter the

Admin Menu

menu when

Panel Lock Set

is set to

Enable

. In this case,

enter the password you specified, and press the

(Set) button.

Press the

(Menu)

button.

Press the

button until

System

is highlighted, and then press the

(Set)

button.

Press the

button until

Admin Menu

is highlighted, and then press the

(Set)

button.

Press the

button until

Maintenance

is highlighted, and then press the

(Set)

button.

Press the

button until

Initialize NVM

is highlighted, and then press the

(Set)

button.

Press the

button until the desired setting is highlighted, and then press the

(Set)

button.

Press the

button until

Yes

is highlighted, and then press the

(Set)

button.

The printer restarts automatically to apply the settings.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Search results

Summary of Contents for C1765nf Color Laser

Reviews:

Dell C1765nf Color Laser, User Manual, Page: 203 / 382

Search results

Summary of Contents for C1765nf Color Laser

Reviews: