Dell C1765nf Color Laser, User Manual, Page: 43 / 382

Connecting Your Printer
41
Manual SSID Setup
NOTE:
A password is required to enter
Admin Menu
when
Panel Lock Set
is set to
Enable
. In this case, enter the
password you specified, and press the (Set) button.
1 Press the (Menu) button.
2 Press the button until
System
appears, and then press the (Set) button.
3 Press the button until
Admin Menu
appears, and then press the (Set) button.
4 Press the button until
Network
appears, and then press the (Set) button.
5 Press the button until
Wireless Setup
appears, and then press the (Set) button.
6 Press the button until
Manual Setup
appears, and then press the (Set) button.
7 Enter the SSID, and then press the (Set) button.
8 Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment, and then press
the (Set) button.
If you select
Infrastructure
, proceed to step 9.
If you select
Ad-hoc
, proceed to step 10.
9 Select the encryption type from
No Security, Mixed mode PSK
,
WPA-PSK-TKIP
,
WPA2-PSK-AES
, or
WEP
.
If you do not set security for your wireless network:
• Press the
button until
No Security
appears, and then press the (Set) button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Press the button until
Mixed mode PSK
,
WPA-PSK-TKIP
, or
WPA2-PSK-AES
appears, and then
press the (Set) button.
b
Enter the passphrase, and then press the (Set) button.
NOTE:
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
a
Press the button until
WEP
appears, and then press the (Set) button.
b
Enter the WEP key, and then press the (Set) button.
c
Press the button to highlight the desired transmit key from
WEP Key 1
to
WEP Key 4
, and then press
the
(Set)
button.
Proceed to step 11.
10
Select the encryption type from
No Security
or
WEP
.
If you do not set security for your wireless network:
• Ensure that
No Security
appears, and then press the (Set) button.
To use WEP encryption:
a
Press the button until
WEP
appears, and then press the
(Set)
button.
b
Enter the WEP key, and then press the
(Set)
button.
c
Press the button to highlight the desired transmit key from
WEP Key 1
to
WEP Key 4
, and then press
the (Set) button.
11
The
Restart System
screen appears and the printer is rebooted, wireless LAN connection setting is completed.