Dell C1765nf Color Laser User Manual Download Page 312

Page: 312 / 382

310

Specifications

MIB Compatibility

A Management Information Base (MIB) is a database containing information about network devices (such as

adapters, bridges, routers, or computers). This information helps network administrators manage the network

(analyze performance, traffic, errors, and so on). Dell C1765nf/C1765nfw Color Multifunction Printer complies with

standard industry MIB specifications, allowing the printer to be recognized and managed by various printer and

network management software systems.

Environment

Operation

Print Quality Guarantee

Storage

Altitude

NOTE:

For more information on adjusting the altitude, see "Adjust Altitude" on page 151.

Interfaces

Standard local:
Standard network:

USB 2.0
10Base-T/100Base-TX Ethernet
IEEE 802.11b/802.11g (Wireless)

(Dell C1765nfw Color Multifunction

Printer only)

Temperature

10-32°C

Relative humidity

10-85% RH (no condensation)

Temperature

15-28°C

Relative humidity

20-70% RH (no condensation)

Temperature range

-20-40°C

Storage humidity range

5-80% RH (no condensation)

Operating

Up to 3,100 m (10,000 feet)

Storage 70.9275

Kpa

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Search results

Summary of Contents for C1765nf Color Laser

Reviews:

Dell C1765nf Color Laser, User Manual, Page: 312 / 382

Search results

Summary of Contents for C1765nf Color Laser

Reviews: