manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 294 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 294

292

Faxing

c

Press the 

 button until 

Apply Settings

 is highlighted, and then press the 

 (

Set

) button.

d

When 

Are You Sure?

 is displayed, ensure that 

Yes

 is highlighted, and then press the 

 (

Set

) button.

To change the speed dial number:

a

Press the 

 button until 

Speed Dial No

 is highlighted, and then press the 

 (

Set

) button.

b

Press the 

 button to move the cursor to the speed dial number you want to edit, press the 

 (

Set

) button 

to select or deselect the number, and then press the   button.

c

Press the 

 button until 

Apply Settings

 is highlighted, and then press the 

 

(Set)

 button.

d

When 

Are You Sure?

 is displayed, ensure that 

Yes

 is highlighted, and then press the 

 

(Set)

 button.

To delete the group dial:

a

Press the 

 

(Backspace) 

button.

b

When 

Are You Sure?

 is displayed, ensure that 

Yes

 is highlighted, and then press the 

 

(Set)

 button.

7

If you want to edit another group dial number, repeat step 6.

8

To return to the previous screen, press the   

(Back) 

button.

Sending a Fax Using Group Dial (Multi-address Transmission)

1

Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From 

the Document Glass" on page 233.

2

Press the 

 (

Fax

) button.

3

Specify a fax number using group dial.
You can specify destinations by selecting or searching from a list of destinations registered in the Phone Book.
To select destinations from Phone Book:

a

Press the 

 button until 

Group Dial

 is highlighted, and then press the 

 (

Set

) button.

OR
Press the 

 (

Contacts

) button, press the 

 button until 

Group Dial

 is highlighted, and then press the 

 (

Set

) button.

b

Press the 

 button to move the cursor to the desired destination.

To check the detailed information of the destination, press the # button.

c

Press the 

 (

Set

) button to select the destination, and then press the   button.

You can also directly find the destination by its group dial number. Enter the number using the numeric 

keypad, and then press the 

 (

Set

) button.

To search destinations from Phone Book:

a

Press the 

 button until 

Search Phone Book

 is highlighted, and then press the 

 (

Set

) button.

OR
Press the 

 (

Contacts

) button, press the 

 button until 

Search

 is highlighted, and then press the 

(

Set

) button.

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments