manualshive.com logo in svg

Dell C1765nf Color Laser, User Manual, Page: 46 / 382

Share
Download
Dell C1765nf Color Laser User Manual Download Page 46

44

Connecting Your Printer

If the phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria, Belgium, Italy, 

France and Switzerland), and you are supplied with a yellow terminator, insert the yellow terminator into the 

phone connector (

).

Turning On the Printer

 

WARNING: 

Do not use extension cords or power strips.

 

WARNING: 

The printer should not be connected to an Uninterruptible Power Supply (UPS) system.

1

Connect the power cable to the power connector on the rear of your printer (see "Rear View" on page 26).

2

Connect the other end of the cable to the power source.

Phone connector

Yellow terminator

Summary of Contents for C1765nf Color Laser































































































































































































































































































































































































Reviews:

No comments