Mitsubishi Electric MR-J4 TM Series, Инструкция по эксплуатации, Страница: 41 / 594

1. FUNCTIONS AND CONFIGURATION
1 - 24
1.6 Model designation
(1) Rating plate
The following shows an example of rating plate for explanation of each item.
Country of origin
Model
Capacity
Applicable power supply
Rated output current
Standard, Manual number
Ambient temperature
IP rating
KC certification number, The year and month of manufacture
Serial number
TOKYO 100-8310, JAPAN MADE IN JAPAN
IP20
MSIP-REI-MEK-TC301A028G51
Max. Surrounding Air Temp.: 55°C
POWER :100W
MR-J4-10TM
AC SERVO
SER.A45001001
OUTPUT: 3PH170V 0-360Hz 1.1A
MAN.: IB(NA)0300288
INPUT : 3AC/AC200-240V 0.9A/1.5A 50/60Hz
STD.: IEC/EN 61800-5-1
DATE:2015-06
MODEL
(2) Model
The following describes what each block of a model name indicates. Not all combinations of the symbols
are available.
Series
Rated output
Multi-network interface
Special specifications
Symbol Rated output [kW]
10 0.1
20 0.2
40 0.4
Symbol Special specifications
None Standard
60 0.6
70 0.75
100 1
200 2
350 3.5
500 5
700 7
11K 11
15K 15
22K 22
Power supply
Symbol Power supply
None 3-phase or 1-phase
200 V AC to 240 V AC
4 3-phase 380 V AC to 480 V AC
1 1-phase 100 V AC to 120 V AC
MR-J4-_TM_ without regenerative resistor (Note 2) -PX
MR-J4-_TM_ with a special coating specification (3C2) (Note 3) -EB
-ED Amplifiers without dynamic brake (Note 1)
Note 1. Dynamic brake which is built in 7 kw or smaller servo amplifiers is removed. Refer to app. 9.1 for details.
2. Indicates a servo amplifier of 11 kW to 22 kW that does not use a regenerative resistor as standard accessory.
Refer to app. 9.2 for details.
3. Type with a specially-coated servo amplifier board (IEC 60721-3-3 Class 3C2). Refer to app. 9.3 for details.