Mitsubishi Electric MR-J4 TM Series, Инструкция по эксплуатации

Страница: 163 / 594

5. PARAMETERS
5 - 24
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Network
ECT EIP
PA15
*ENR
Encoder
output pulses Set the encoder output pulses from the servo amplifier by using the number of
output pulses per revolution, dividing ratio, or electronic gear ratio. (after
multiplication by 4)
Selecting "Dividing ratio setting (_ _ 1 _)" of "Encoder output pulse setting selection"
in [Pr. PC03] will divide the travel distance [pulse] of the linear encoder by the setting
value.
Set a numerator of the electronic gear for the A/B-phase pulse output when selecting
"A-phase/B-phase pulse electronic gear setting (_ _ 3 _)" of "Encoder output pulse
setting selection" in [Pr. PC03].
The maximum output frequency is 4.6 Mpulses/s. Set the parameter within this
range.
Setting range: 1 to 4194304 4000
[pulse/
rev]
PA16
*ENR2
Encoder
output pulses 2 Set a denominator of the electronic gear for the A/B-phase pulse output.
Set a denominator of the electronic gear when selecting "A-phase/B-phase pulse
electronic gear setting (_ _ 3 _)" of "Encoder output pulse setting selection" in [Pr.
PC03].
Selecting "Dividing ratio setting (_ _ 1 _)" of "Encoder output pulse setting selection"
in [Pr. PC03] will disable the setting value.
Setting range: 1 to 4194304 1