Mitsubishi Electric FR-F800, Инструкция по эксплуатации

Страница: 391 / 834

Parameters (M) Monitor display and monitor output signal
FR-F800 5 - 229
79 179 Y79
Pulse train output of
output power
Output in pulses every time the
accumulated output power of the
inverter reaches the Pr. 799 setting.
Pr. 799 5-247
82 182 Y82 BACnet binary output
Enables output from the Binary Output
object for BACnet communication.
Pr. 549 5-495
85 185 Y85
DC current feeding
Output when there is a power failure or
undervoltage for the AC current.
Pr. 30 5-532
86 186 Y86
Control circuit capacitor
life
(for Pr. 313 to Pr. 322)
"
Output when the control circuit capacitor
approaches the end of its life.
Pr. 255 to
Pr. 259
5-88
87 187 Y87
Main circuit capacitor life
(for Pr. 313 to Pr. 322)
"
Output when the main circuit capacitor
approaches the end of its life.
88 188 Y88
Cooling fan life
(for Pr. 313 to Pr. 322)
"
Output when the cooling fan approaches
the end of its life.
89 189 Y89
Inrush current limit circuit
life
(for Pr. 313 to Pr. 322)
"
Output when the inrush current limit
circuit approaches the end of its life.
90 190 Y90 Life alarm
Output when any of the control circuit
capacitor, main circuit capacitor and
inrush current limit circuit or the cooling
fan approaches the end of its life.
91 191 Y91
Fault output 3(power-OFF
signal) Output when an error occurs due to an
inverter circuit fault or connection fault.
⎯
5-234
92 192 Y92
Energy saving average
value updated timing
Switches between ON and OFF each time
the average power saving is updated
when using the power saving monitor.
This cannot be set in Pr. 195 or Pr. 196,Pr.
320 to Pr. 322 (relay output terminal).
Pr. 52, Pr. 54,
Pr. 158,
Pr. 891 to
Pr. 899
5-57
93 193 Y93
Current average monitor
signal
Outputs the average current and
maintenance timer value as a pulse.
This cannot be set in Pr. 195 or Pr. 196,
Pr. 320 to Pr. 322 (relay output terminal).
Pr. 555 to
Pr. 557
5-94
94 194 ALM2 Fault output 2
Output when the inverter's protective
function is activated to stop the output
(at fault occurrence).
The signal output continues even during
an inverter reset, and the signal output
stops after the reset release.
"
⎯
5-233
95 195 Y95 Maintenance timer signal
Output when Pr. 503 reaches the Pr. 504
setting or higher.
Pr. 503, Pr. 504 5-92
96 196 REM Remote output
Output via terminals when certain
parameters are set. Pr. 495 to
Pr. 497
5-241
98 198 LF Alarm
Output when an alarm (fan fault or
communication error warning) occurs.
Pr. 121, Pr. 244
5-155,
5-452
99 199 ALM Fault
Output when the inverter's protective
function is activated to stop the output
(at fault occurrence). The signal output is
stopped after a reset.
⎯
5-233
200 300 FDN2 Second PID lower limit
Output when the value is lower than the
lower limit of second PID control.
Pr. 753 to
Pr. 758
5-347
201 301 FUP2 Second PID upper limit
Output when the value is higher than the
upper limit of second PID control.
202 302 RL2
Second PID forward/
reverse rotation output Output during forward rotation under
second PID control.
203 303 PID2
Second During PID
control activated
Output during second PID control.
204 304 SLEEP2
During second PID
output shutoff Output during second PID output
suspension function operation.
Pr. 753 to
Pr. 758, Pr. 1147
to Pr. 1149
205 305 Y205
Second PID deviation
limit
Output when the absolute deviation
value during second PID control exceeds
the limit value.
Pr. 753 to
Pr. 758,
Pr. 1145,
Pr. 1146
Setting
Signal
name
Function Operation
Related
parameter Refer to
page
Positive
logic
Negative
logic
Tab. 5-101: Output terminal function assignment (3)