Mitsubishi Electric FR-F800, Инструкция по эксплуатации

Страница: 570 / 834

(A) Application parameters Parameters
5 - 408
I003069E
Fig. 5-203: PID input pressure control
NOTES When the control switches between the first PID control and second PID control while the set
point is changed by the Pr. 1380 setting value or while the Y229/Y230 signal is output, the set
point returns to its original value or the signal turns OFF, and the detection restarts.
When the PID input pressure control function and the PID upper/lower limit pre-warning function
are used simultaneously, each function may change the set point. When the set point change is
attempted by both functions, the change by the PID input pressure control function has priority.
When the PID input pressure control function and the PID sleep boost function are used simulta-
neously, each function may change the set point. When the set point change is attempted by both
functions, the change by the PID input pressure control function has priority. (The sleep state is
established without applying the set point change by the PID sleep boost function.)
Y229
Y230
Pr.1370 Pr.1370 Pr.1370 Pr.1370 Pr.1370 Pr.1370
Deceleration stop
(
Pr.1381 = "1")
Deceleration stop
(
Pr.1381 = "1")
Input pressure
Time
ON
Input pressure
ON
ON
Output frequency
Input pressure
warning level
(Pr. 1378)
Pr. 1370
Time
Pr. 1370 Pr. 1370
For reverse action
Set point
When Pr. 1381 = "1"
Deceleration stop
(Pr. 1381 = "1")
When Pr.1381= "1", operation can
be restarted after the input
pressure reaches or exceeds the
Pr. 1378 setting.
Pr. 1380
Pr. 1373 Pr. 1373
Input pressure fault
level (Pr. 1379
Output shutoff
(Pr. 1381 = "0")
Time
When Pr. 1381 = "0"