Mitsubishi Electric FR-F800, Инструкция по эксплуатации

Страница: 22 / 834

Product checking and accessories Introduction
1 - 2
1.2 Product checking and accessories
Unpack the product and check the capacity plate and the rating plate to ensure that the model agrees
with the order and the product is intact.
1.2.1 Inverter model
Specification differs by the type. Major differences are shown in the table below.
Applicable for the FR-F820-00340(7.5K) or higher, and the FR-F840-00170(7.5K) or higher.
I003001E_B
Fig. 1-1: Inverter model FR-F800
Type Monitor output
Initial setting
Built-in
EMC filter
Control
logic
Rated
frequency
Pr. 19 "Base
frequency
voltage"
Pr. 570
"Multiple
rating
setting"
FM
(terminal FM
equipped model) Terminal FM (pulse train output)
Terminal AM (analog voltage
output (0 to
±
10 V DC))
OFF Sink logic 60 Hz
9999 (same as
the power
supply voltage)
1 (LD rating)
CA
(terminal CA
equipped model) Terminal CA (analog current
output (0 to 20 mA DC))
Terminal AM (analog voltage
output (0 to
±
10 V DC))
ON
Source
logic
50 Hz
8888 (95% of the
power supply
voltage)
0 (SLD rating)
Tab. 1-1: Differences between the types
F R - F 8 2 0 - 00046 - 1
Symbol Voltage class Symbol Structure, functionality Symbol Description Symbol Type
2 200 V class 0 Standard model
00023 to
12120
SLD rated inverter
current [A]
1 FM
4 400 V class 2 Separated converter type
0.75K to
560K
LD rated inverter
capacity [kW]
2 CA
Symbol
Circuit board coating
(conforming to
IEC60721-3-3 3C2/3S2)
Plated conductor
None Without Without
-60 With Without
-06
With With
Rating plate
Inverter model
Input rating
Output rating
SERIAL