Mitsubishi Electric FR-F800, Инструкция по эксплуатации

Страница: 523 / 834

Parameters (A) Application parameters
FR-F800 5 - 361
When the PID output shutoff release level is reached during a deceleration stop, output shutoff is
released, operation is re-accelerated and PID control is continued. During deceleration Pr. 576
"Output interruption detection level" is invalid.
Integral stop selection at limited frequency (Pr. 1015)
The operation for the integral term can be selected when the frequency is restricted by the upper/
lower limit, or the manipulated amount is limited to ±100% during PID control.
The operation during output shutoff can be selected for the integral term using the PID output sus-
pension function (SLEEP function).
I002694E
Fig. 5-172: Output interruption (SLEEP function)
NOTES
The stirring function during the PID sleep prevents clogging of the pump while the SLEEP function
is activated. (Refer to page 5-398.)
The PID sleep boost function maintains the sleep state for a long period of time.
(Refer to page 5-398.)
Pr. 1015 setting Operation at limited frequency
Operation during output
interruption
0 (initial value) Integral stop Integral clear
1 Integral continuation Integral clear
10 Integral stop Integral stop
11 Integral continuation Integral stop
Tab. 5-175: Settings of Pr. 1015
RUN
SLEEP
PID
1000%
∗
Deviation
When Pr. 554 = "10 to 17", reverse operation (Pr. 128 = "10")
Pr. 577 –
Output frequency
Pr. 576
Less than Pr. 575
Deceleration stop
SLEEP period
Pr. 575 or more
OFF
Cancel
level
Time
ON