Mitsubishi Electric FR-F800, Инструкция по эксплуатации

Страница: 273 / 834

Parameters (F) Setting of acceleration/deceleration time and acceleration/deceleration pattern
FR-F800 5 - 111
The multi-speed operation function is invalid when remote setting function is selected.
Even when the remotely-set frequency is cleared by turning ON the RL (clear) signal after turning
OFF (ON) both the RH and RM signals, the inverter operates at the remotely-set frequency stored
in the last operation if power is reapplied before one minute has elapsed since turning OFF (ON)
both the RH and RM signals.
When the remotely-set frequency is cleared by turning ON the RL (clear) signal after turning OFF
(ON) both the RH and RM signals, the inverter operates at the frequency in the remotely-set fre-
quency cleared state if power is reapplied before one minute has elapsed since turning OFF (ON)
both the RH and RM signals.
E
CAUTION:
When using the remote setting function, set the maximum frequency again according to the
machine.
Parameters referred to
Pr. 1 Maximum frequency => page 5-171
Pr. 18 High speed maximum frequency => page 5-171
Pr. 7 Acceleration time => page 5-99
Pr. 8 Deceleration time => page 5-99
Pr. 44 Second acceleration/deceleration time => page 5-99
Pr. 45 Second deceleration time => page 5-99
Pr. 28 Multi-speed input compensation selection => page 5-57
Pr. 178 to Pr. 182 (input terminal function selection) => page 5-279
Setting frequency is "0".
Acceleration RH
Remotely-set frequency stored last time
Output fr
equen
c
y
[H
z]
Remotely-set frequency stored last time
ON
ON
ON
ON
ON
ON
OFF
Time
< 1 minute
Deceleration RM
Clear RL
Forward rotation STF
Power supply
Acceleration RH
O
utput fr
equen
cy
[H
z]
Remotely-set frequency stored last time
Deceleration RM
Forward rotation STF
Power supply
Clear RL
Operation is performed at the
set frequency 0 Hz.
ON
ON
ON
ON
ON
ON
OFF
Time
> 1 minute
1 minute