Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 88 / 484

87
3. Parameters
3.4 Parameter list (by function group number)
1
2
3
4
5
6
7
8
9
10
 (G) Control parameters
Parameters for motor control.
*1 The setting is available when a plug-in option for Vector
control is installed.
*2 On the LCD operation panel used as the command source,
the parameter number in parentheses appears instead of that
starting with the letter C.
*3 For the Ethernet model and the safety communication model,
the setting is available only when the FR-A8AY is installed.
*4 For details, refer to the Instruction Manual (Communication).
*5 Available when the PLC function is enabled. ( Pr.313 to
Pr.315 are always available for settings in the Ethernet model
and the safety communication model.)
*6 For the standard model, the setting is available only when a
communication option is installed.
*7 For details, refer to the FR-E800-SCE Instruction Manual
(Functional Safety).
Pr. group Pr. Name
Refer
to page
G000 0 Torque boost 426
G001 3 Base frequency 428
G002 19 Base frequency voltage 428
G003 14 Load pattern selection 430
G010 46 Second torque boost 426
G011 47 Second V/F (base frequency) 428
G030 60
Energy saving control
selection
432
G060 673
SF-PR slip amount adjustment
operation selection
[200/400 V
class]
433
G061 674
SF-PR slip amount adjustment
gain
[200/400 V class]
433
G100 10
DC injection brake operation
frequency
434
G101 11
DC injection brake operation
time
434
G102 802 Pre-excitation selection 434
G103 850 Brake operation selection 434
G106 250 Stop selection 440
G107 70
Special regenerative brake
duty
442
G110 12
DC injection brake operation
voltage
434
G120 882
Regeneration avoidance
operation selection
446
G121 883
Regeneration avoidance
operation level
446
G123 885
Regeneration avoidance
compensation frequency limit
value
446
G124 886
Regeneration avoidance
voltage gain
446
G125 665
Regeneration avoidance
frequency gain
446
G200 800 Control method selection 97
G203 245 Rated slip 449
G204 246
Slip compensation time
constant
449
G205 247
Constant output range slip
compensation selection
449
G210 803
Constant output range torque
characteristic selection 114 ,
143
G211 820 Speed control P gain 1 121
G212 821 Speed control integral time 1 121
G213 824
Torque control P gain 1
(current loop proportional
gain)
149
G214 825
Torque control integral time 1
(current loop integral time)
149
G215
823
*1
Speed detection filter 1 154
G217 854 Excitation ratio 155
G220 877
Speed feed forward control/
model adaptive speed control
selection
124
G221 878 Speed feed forward filter 124
G222 879
Speed feed forward torque
limit
124
G223 881 Speed feed forward gain 124
Simple Simple Simple
Simple Simple Simple
G224 828 Model speed control gain 124
G230 840 Torque bias selection 126
G231 841 Torque bias 1 126
G232 842 Torque bias 2 126
G233 843 Torque bias 3 126
G234 844 Torque bias filter 126
G235 845 Torque bias operation time 126
G236 846
Torque bias balance
compensation
126
G237 847
Fall-time torque bias terminal 4
bias
126
G238 848
Fall-time torque bias terminal 4
gain
126
G240
367
*1
Speed feedback range 450
G241
368
*1
Feedback gain 450
G300 451
Second motor control method
selection
97
G311 830 Speed control P gain 2 121
G312 831 Speed control integral time 2 121
G313 834
Torque control P gain 2
(current loop proportional
gain)
149
G314 835
Torque control integral time 2
(current loop integral time)
149
G315
833
*1
Speed detection filter 2 154
G400 286 Droop gain 452
G401 287 Droop filter time constant 452
G410 653 Speed smoothing control 453
G411 654
Speed smoothing cutoff
frequency
453
G932 89
Speed control gain (Advanced
magnetic flux vector)
102
G942 569
Second motor speed control
gain
102
Pr. group Pr. Name
Refer
to page