Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 175 / 484

174
8. (E) Environment Setting Parameters
8.10 Parameter write selection
*2 Writing during operation is disabled. To change the parameter setting value, stop the operation.
 Parameter write disabled (Pr.77 = "1")
• Parameter write, Parameter clear, and All parameter clear are disabled. (Parameter read is enabled.)
• The following parameters can be written even if
Pr.77 = "1".
*1 Writing during operation is disabled. To change the parameter setting value, stop the operation.
 Parameter write enabled during operation (Pr.77 = "2")
• These parameters can always be written.
• The following parameters cannot be written during operation even if
Pr.77 = "2". To change the parameter setting value,
stop the operation.
Pr. Name Pr. Name
22 Stall prevention operation level 297 Password lock/unlock
75
Reset selection/Disconnected PU detection/PU stop
selection
496, 497 (Remote output)
77 Parameter write selection 805 Torque command value (RAM)
79
*1
Operation mode selection 806 Torque command value (RAM, EEPROM)
160 User group read selection 997 Fault initiation
296 Password lock level 1020 Trace operation selection
Pr. Name Pr. Name
23
Stall prevention operation level compensation
factor at double speed
455 Second motor excitation current
40 RUN key rotation direction selection 456 Rated second motor voltage
48 Second stall prevention operation level 457 Rated second motor frequency
60 Energy saving control selection 458 to 462 (Second motor constant)
61 Reference current 463 Second motor auto tuning setting/status
66
Stall prevention operation reduction starting
frequency
507 Display ABC relay contact life
71 Applied motor 541 Frequency command sign selection
79 Operation mode selection 560 Second frequency search gain
80 Motor capacity 570 Multiple rating setting
81 Number of motor poles 574 Second motor online auto tuning
82 Motor excitation current 631
Inverter output fault detection enable/disable
selection
83 Rated motor voltage 639, 640 (Brake sequence)
84 Rated motor frequency 673
SF-PR slip amount adjustment operation
selection
90 to 94 (Motor constant) 699 Input terminal filter
95 Online auto tuning selection 702 Maximum motor frequency
96 Auto tuning setting/status
706, 707, 711,
712, 717, 721,
724, 725, 1412
(PM motor tuning)
178 to 196 (Input and output terminal function selection) 720, 737
(Motor starting resistance tuning
compensation coefficient 2)
261 Power failure stop selection 738 to 746, 1413 (Second PM motor tuning)
277 Stall prevention operation current switchover 800 Control method selection
289 Inverter output terminal filter 858 Terminal 4 function assignment
292 Automatic acceleration/deceleration 859 Torque current/Rated PM motor current
293 Acceleration/deceleration separate selection 860
Second motor torque current/Rated PM motor
current
298 Frequency search gain 998 PM parameter initialization
313 to 322 (Extended output terminal function selection) 999 Automatic parameter setting
329 Digital input unit selection 1002 Lq tuning target current adjustment coefficient
415 Inverter operation lock mode setting
418 Extension output terminal filter
450 Second applied motor
451 Second motor control method selection
453 Second motor capacity
454 Number of second motor poles