Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 466 / 484

11
12
13
14
15
16
17
18
19
20
465
18. Appendix
18.4 Parameters (functions) and instruction codes under different control methods
18.4
Parameters (functions) and instruction codes
under different control methods
*1 Instruction codes are used to read and write parameters in accordance with communication (such as the Mitsubishi inverter protocol). (For details
of communication, refer to the Instruction Manual (Communication).)
*2 Function availability under each control method is shown as follows:
○ : Available
×: Not available
Δ : Available with some restrictions
*3 For Parameter copy, Parameter clear, and All parameter clear, ○ indicates the function is available, and × indicates the function is not available.
*4 Communication parameters that are not cleared by parameter clear or all parameter clear (H5A5A or H55AA) via communication. (For details of
communication, refer to the Instruction Manual (Communication).)
*5 When a communication option is installed, parameter clear (lock release) during password lock ( Pr.297 Password lock/unlock ≠ ”9999”) can be
performed only from the communication option.
Notation
Mark Description Mark Description
Available for the standard model. Available for the 400 V class inverters.
Available for the FM type inverter (standard model). Available for the three-phase power input model.
Available for the AM (50 Hz) type inverter (standard model). Available when the FR-A8AP is installed.
Available for the AM (60 Hz) type inverter (standard model). Available when the FR-A8AX is installed.
Available for the Ethernet model and the safety
communication model.
Available when the FR-A8AY is installed.
Available for the Protocol group A (Ethernet model / safety
communication model).
Available when the FR-A8AR is installed.
Available when the FR-A8NC is installed.
Available for the safety communication model. Available when the FR-A8ND is installed.
Available for the 200 V class inverters. Available when the FR-A8NP is installed.
Pr. Name
Instruction
code
*1
Control method
*2
Parameter
Read Writ
e
Ex
te
nd
ed
Cop
y
*3
C
lear
*3
All clea
r
*3
Sp
eed
To
rqu
e
Sp
eed
To
rqu
e
Sp
eed
0 Torque boost 00 80 0 ○ × × × × × × ○ ○ ○
1 Maximum frequency 01 81 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2 Minimum frequency 02 82 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3 Base frequency 03 83 0 ○ × × × × × × ○ ○ ○
4 Multi-speed setting (high speed) 04 84 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5 Multi-speed setting (middle speed) 05 85 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6 Multi-speed setting (low speed) 06 86 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7 Acceleration time 07 87 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8 Deceleration time 08 88 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
9 Electronic thermal O/L relay 09 89 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10 DC injection brake operation frequency 0A 8A 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
11 DC injection brake operation time 0B 8B 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12 DC injection brake operation voltage 0C 8C 0 ○ ○ × × × × × ○ ○ ○
13 Starting frequency 0D 8D 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
14 Load pattern selection 0E 8E 0 ○ × × × × × × ○ ○ ○
15 Jog frequency 0F 8F 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
16 Jog acceleration/deceleration time 10 90 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
17 MRS/X10 terminal input selection 11 91 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
18 High speed maximum frequency 12 92 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
19 Base frequency voltage 13 93 0 ○ × × × × × × ○ ○ ○
20
Acceleration/deceleration reference
frequency
14 94 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
21
Acceleration/deceleration time
increments
15 95 0 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
V/FV/FV/F
Magnetic fluxMagnetic fluxMagnetic flux
Vector Vector Vector
Sensorless Sensorless Sensorless PM PM PM