Mitsubishi Electric FR-D720S SC EC, Инструкция по эксплуатации

Страница: 369 / 512

Parameter Communication operation and settings
FR-D700 SC EC 6 - 219
●
Special monitor selection numbers.
Refer to section 6.10.2 for details of the monitor description.
When "0.01 to 9998" is set in Pr. 37 and "01" in instruction code HFF, the data format is 6
digits (E2).
Input terminal monitor details
(when the terminal is ON: 1, when the terminal is OFF: 0, —: undetermined value)
Output terminal monitor details
(when the terminal is ON: 1, when the terminal is OFF: 0, —: undetermined value)
Data Description Unit Data Description Unit
H01
Output frequency/speed
0.01Hz
0.001
H10
Output terminal status
—
H02 Output current 0.01A H14 Cumulative energization time 1h
H03 Output voltage 0.1V H17 Actual operation time 1h
H05
Frequency setting/speed setting
0.01Hz
0.001
H18 Motor load factor 0.1%
H07 Motor torque 0.1% H19 Cumulative power 1kWh
H08 Converter output voltage 0.1V H34 PID set point 0.1%
H09 Regenerative brake duty 0.1% H35 PID measured value 0.1%
H0A
Electronic thermal relay function
load factor
0.1% H36 PID deviation 0.1%
H0B Output current peak value 0.01A H3D Motor thermal load factor 0.1%
H0C Converter output voltage peak value 0.1V H3E Inverter thermal load factor 0.1%
H0E Output power 0.01kW H3F Cumulative power 2 0.1kWh
H0F
Input terminal status
— H40 PTC thermistor resistance 0.01k
Ω
Tab. 6-60: Special monitor selection numbers
b15 b0
— — — — — — — — — RH RM RL — — STR STF
b15 b0
— — — — — — — — SO — ABC — — — — RUN