Mitsubishi Electric FR-D720S SC EC, Инструкция по эксплуатации, Страница: 53 / 512

Wiring Control circuit specifications
FR-D700 SC EC 3 - 17
3.4.1 Control circuit terminals
Connection to the terminals
Use a wire end sleeve and a cable with a sheath stripped off for the control circuit wiring. For a
single wire, strip off the sheath of the cable and apply directly.
Remove about 10mm of the cable insulation. Wire the stripped cable after twisting it to
prevent it from becoming loose. In addition, do not solder it.
Insert wires to a wire end sleeve, and check that the wires come out for about 0 to 0.5 mm
from a sleeve
.
I002183E
Fig. 3-6: Terminal layout
I002126E
Fig. 3-7: Preparation of the cable
Fig. 3-8:
Fixing of wire end sleeves
I001984E
STF STR PC SD RH RM RL
AM
C B A
10 2 5 4
RUN SE S1 S2 SC SO SD
Recommended cable size:
0.3 mm² to 0.75 mm²
10 mm
Sleeve
Cable
Shell
0–
0,5 m
m