Mitsubishi Electric FR-D720S SC EC, Инструкция по эксплуатации

Страница: 316 / 512

Misoperation prevention and parameter setting restriction Parameter
6 - 166
Write parameters during operation (Pr. 77 = 2)
Parameters can always be written. The following parameters cannot be written during operation
if Pr. 77 = 2. Stop operation when changing their parameter settings.
Parameter Name
23 Stall prevention operation level compensation factor at double speed
40 RUN key rotation direction selection
48 Second stall prevention operation current
60 Energy saving control selection
66 Stall prevention operation reduction starting frequenc
71 Applied motor
79 Operation mode selection
80 Motor capacity (simple magnetic flux vector control)
82 Motor excitation current
83 Motor rated voltage
84 Rated motor frequency
90 Motor constant (R1)
96 Auto tuning setting/status
178–182 Input terminal function selection
190/192/197 Output terminal function selection
261 Power failure stop selection
298 Frequency search gain
450 Second applied motor
561 PTC thermistor protection level
Tab. 6-33: Parameters that cannot be written during operation