Delta ASD-A3-0121, Руководство пользователя

Страница: 320 / 603

ASDA-A3 Parameters
Revision December, 2017
8-63
8
P2.008 ■ Special parameter write-in function
Address: 0210H
0211H
Default: 0 Control mode: All
Unit:
-
Setting range: 0 – 65535
Format: DEC Data size: 16-bit
Settings:
Special parameter write-in function:
Code Function
10 Reset parameter (power back on after reset).
20 P4.010 is writable.
22 P4.011 – P4.021 are writable.
30, 35 Save Compare, Capture, and E-Cam data.
406 Enable forced DO mode.
400 When forced DO mode is enabled, switch back to the normal DO mode.
Note: A3-L does not support the E-Cam function.
P2.009 DI response filter time
Address: 0212H
0213H
Default: 2 Control mode: All
Unit: ms Setting range: 0 – 20
Format: DEC Data size: 16-bit
Settings:
When environmental interference is high, increasing this value can enhance the control stability.
If you set the value too high, it impacts the response time.
P2.010 DI1 functional planning
Address: 0214H
0215H
Default: 0x0101 Control mode: All
Unit: - Setting range: 0 – 0x015F (last two codes are
DI codes)
Format: HEX Data size: 16-bit
Settings:
YX Z U

YX: input function selection
Please refer to Table 8.1

Z: input contact: A or B contact
0: set this input contact to be normally closed (B contact)
1: set this input contact to be normally open (A contact)

U: not in use