Delta ASD-A3-0121, Руководство пользователя

Страница: 272 / 603

ASDA-A3 Parameters
Revision December, 2017
8-15
8
P0.008
★
Total servo drive operation time
Address: 0010H
0011H
Default: 0 Control mode: All
Unit:
Hour
Setting range: 0 – 65535
Format: DEC Data size: 16-bit
Settings:
Displays the total servo drive operation time. The unit is in hours and durations of less than 1 hour are not
recorded. The recorded hours are saved when the servo powers off.
D C B A U Z Y X
DCBA Servo on time UZYX Servo power applied time
h High bit L Low bit
P0.009
★
■ Status monitoring register 1
Address: 0012H
0013H
Default: 0 Control mode: All
Unit:
-
Setting range: -
Format: DEC Data size: 32-bit
Settings:
Set the value to be monitored in P0.017 through the drive panel or communication. Please refer to
P0.002. To get the status, the communication port must read the communication address.
For example, if you set P0.017 to 3, when accessing P0.009, the panel displays the total number of
feedback pulses of the motor encoder. If accessing the data through MODBUS communication, it reads
two 16-bit values (0012H and 0013H) as a single 32-bit value. (0013H : 0012H) = (Hi-word : Low-word).
Set P0.002 to 23 and the panel displays VAR-1 as the value of P0.009.
P0.010
★
■ Status monitoring register 2
Address: 0014H
0015H
Default: - Control mode: All
Unit:
-
Setting range: -
Format: DEC Data size: 32-bit
Settings:
Set the value to be monitored in P0.018 through the drive panel or communication. Please refer to
P0.002. To get the status, the communication port must read the communication address. Set P0.002 to
24 and the panel displays VAR-2 as the value of P0.010.