Delta ASD-A3-0121, Руководство пользователя

Страница: 113 / 603

Trial Operation and Panel Display ASDA-A3
4-8
Revision December, 2017
4
P0.002
setting value
Monitoring displayed
symbol
Description Unit
6 Input frequency of pulse command [kpps]
7 Motor speed [rpm]
8 Speed command [Volt]
9 Speed command [rpm]
10 Torque command [Volt]
11 Torque command [%]
12 Average torque [%]
13 Peak torque [%]
14 Main circuit voltage [Volt]
15
Load / Motor inertia ratio (note: if it shows 13.0,
it means the actual inertia is 13)
[1 times]
16 IGBT temperature [°C]
17
Resonance frequency (low byte is the first
resonance and high byte is the second one)
[Hz]
18
Z
Z
Z
0 0 0 +5000 +5000
The absolute pulse number of encoder Z phase
equals the homing value, 0. It is +5000 or -5000
pulses when the motor rotates in the forward or
reverse direction.
-
19
Mapping parameter #1: shows the content of
parameter P0.025
(specify the mapping target by P0.035)
-
20
Mapping parameter #2: shows the content of
parameter P0.026
(specify the mapping target by P0.036)
-