Delta ASD-A3-0121, Руководство пользователя

Страница: 30 / 603

ASDA-A3 Installation
Revision December, 2017
2-7
2

The encoder connector must not undergo any high-voltage component test because it will
damage the encoder.

When the motor or brake is undergoing high-voltage component tests, please cut off the
power supply of the controller. You should perform this kind of test only when necessary so
as to protect the product lifespan.
Operation

AC servo motor operation is controlled by the servo drive. Do not directly connect a
commercial type power source (100/200V, 50/60 Hz) to the servo motor circuit;
otherwise, the motor cannot operate normally and may be permanently damaged.

Follow the motor specifications when using the product. The motor’s operation temperature
must not exceed the specified range.

The material of the motor shaft is not rust-proof. To ensure a longer motor life, please apply
rust-proof oil during operation.

The built-in brake is for clamping the motor. Do not use it for stopping the motor.
Caution: the built-in brake is not a device for safely stopping the machine. Please install
another safety stopping device for the machine. When the built-in brake is clamping the
motor, rotation backlash can still occur and the maximum rotation is 1°
– 2°. When a motor
with a brake is operating, the brake lining sometimes generates a noise (a swishing or
clicking sound). This is caused by the structure of brake module and is not a malfunction.
It will not affect the motor’s function.

If any odor, noise, smoke, vapor, or abnormal vibration occurs during motor operation,
please stop the motor and turn off the power immediately.
Others

Delta servo motor has no user-replaceable parts.

Do not disassemble the motor or change its parts. This will void the warranty.

Do not disassemble the motor by yourself. Permanent damage or malfunction of the motor
may occur.

Do not splash any water or oil on the product.