Delta ASD-A3-0121, Руководство пользователя

Страница: 291 / 603

Parameters ASDA-A3
8-34
Revision December, 2017
8
P1.004 MON1 analog monitor output proportion
Address: 0108H
0109H
Default: 100 Control mode: All
Unit: % (full scale) Setting range: 0 – 100
Format: DEC Data size: 16-bit
Settings:
Please refer to P0.003 for the analog output setting.
Example 1:
If the requirement is for the motor to run at 1000 rpm, which corresponds to 8V, and its maximum speed
is 5000 rpm, the setting is:
P1.004 =
Required speed
Maximum speed
×
100% =
1000 rpm
5000 rpm
×
100% = 20%
Refer to the following example for the motor's current speed and relative voltage output:
Motor speed MON1 analog monitor output
300 rpm
MON1 = 8V
×
Current speed
Maximum speed ×
P1 . 004
100
×
100% =8V
×
300 rpm
5000 rpm ×
20
100
×
100% = 2.4V
900 rpm
MON1 = 8V
×
Current speed
Maximum speed ×
P1 . 004
100
×
100% =8V
×
900 rpm
5000 rpm ×
20
100
×
100% = 7.2V
P1.005 MON2 analog monitor output proportion
Address: 010AH
010BH
Default: 100 Control mode: All
Unit: % (full scale) Setting range: 0 – 100
Format: DEC Data size: 16-bit
Settings:
Please refer to P0.004 for the analog output setting.
P1.006 Speed command smoothing constant (Low-pass filter)
Address: 010CH
010DH
Default: 0 Control mode: S / Sz
Unit: ms Setting range: 0 – 1000
Format: DEC Data size: 16-bit
Settings:
0: disable this function
P1.007 Torque command smoothing constant (Low-pass filter)
Address: 010EH
010FH
Default: 0 Control mode: T / Tz
Unit: ms Setting range: 0 – 1000
Format: DEC Data size: 16-bit
Settings:
0: disable this function