Valco Cincinnati VC350A, Manual

Page: 9 / 327

Valco Cincinnati 2-1
General Information
It is the purchaser’s responsibility to ensure that all local, county, state, and national codes, regulations, rules, and
laws relating to safety and safe operating conditions are met and followed.
The best safeguard is trained personnel. The purchaser is responsible for providing personnel who are adequately
trained to install, operate, and maintain Valco components and systems.
This section contains information that is essential to the safety of personnel. Safety information is included through-
out the rest of the manual as well. The following safety conventions are used to indicate potential safety hazards:
Warnings
All personnel involved with the installation, operation, and maintenance of the equipment must read and thoroughly
understand the following warnings:
WARNING! Disconnect all power before opening the control. OTHERWISE,
DEATH OR PERSONAL INJURY COULD OCCUR. Only qualified personnel
should open and service the control.
WARNING! Promptly repair or replace all worn or damaged electrical wiring
and equipment wires. OTHERWISE, DEATH OR PERSONAL INJURY COULD
OCCUR.
WARNING! Properly route all electrical wires. OTHERWISE, DEATH, PER-
SONAL INJURY, OR DAMAGE TO THE MOVING PARTS OF THE MACHINE
MAY OCCUR.
WARNING! This symbol indicates the presence of un-insulated dangerous
voltage within the product’s enclosure. This voltage may cause electrical
shock or fire. FAILURE TO OBSERVE WARNING MAY RESULT IN DEATH,
PERSONAL INJURY, AND/OR EQUIPMENT DAMAGE.
WARNING! This convention is used to alert the user to important installation,
operation, and/or maintenance information. FAILURE TO OBSERVE WARN-
ING MAY RESULT IN DEATH, PERSONAL INJURY, AND/OR EQUIPMENT
DAMAGE.
CAUTION! This convention is used to alert the user to important installation,
operation, and/or maintenance information. FAILURE TO OBSERVE CAUTION
MAY CAUSE EQUIPMENT DAMAGE.
Section 2—Safety Information