Valco Cincinnati VC350A, Manual, Page: 229 / 327

5-3 Valco Cincinnati, Inc.
MC060 Manual/VC350AG AutoGlue Control System Section 5 - Basic Features
Bottom Panel
Features
Figure 5-2. Bottom-Panel Features
Table 5-2. Description of Bottom-Panel Features
IN
S H O P A IR
R E G . A IR
O U T
E XH A U ST
1
2
3
4
5
6
7
8
9
Item # Name Description
1 Flush-mount fluid-flow control
(EPC)
Fluid-flow control manifold block for easy connection and
disconnection of air lines to and from glue pressure system
2 Input port Port that allows shop air to into control
3 Output port Port connected to glue-pressure system to boost glue
pressure
4 Exhaust port Port to exhaust air pressure, which decreases glue
pressure
5 Scanner cable connections Cable entry point for scanner cables (yellow) with strain
relief
6 Power entry module Combination power input, main fuse protection block, on/off
switch, and line filter. Input selection for 115V or 230VAC
7 Valve cable connections Cable entry point for valve cables (blue) with strain relief
8 Encoder cable connection Cable entry point for encoder cable with strain relief
9 Strain reliefs For hardware of externally connected devices such as
JP2000, dump valve or pump.